com.engscript/mcp

Name: com.engscript/mcp
Author: com.engscript

MCPcommunityattivo

v1.0.0com.engscriptUnknownAggiornato 1 mesi fa

Engineering calculation MCP server for oil and gas engineering applications.

Stato dell’endpointattivo

verificato 23 h fa · 960 ms

100 % degli ultimi 5 controlli hanno raggiunto questo endpoint

Funziona in

ClaudeCursorCopilotChatGPTGemini

Dedotto dai trasporti dichiarati da questo annuncio (streamable-http). Un client che non compare qui non è escluso — semplicemente Forge non è in grado di confermarlo.

Indicizzato automaticamente da fonti pubbliche. Non ancora verificato dal suo sviluppatore su Forge.Rivendica questo annuncio →

1 mesi faUltimo aggiornamento

Pacchetto

Autorecom.engscript

LicenzaUnknown

Versione1.0.0

Fontemcp-registry

SBOMCycloneDX 1.6 ↓

Stato di fiducia

60/100Buono

✓Presente nell’indice di Forge+10/10

—Identità del publisher verificata+0/30

→ Publisher: per questo annuncio non risulta alcun repository, quindi `forge publish` non può verificare la proprietà automaticamente. Usa «Rivendica questo annuncio» qui sopra — Forge li esamina a mano.

—Verifica del dominio+0/10

→ Al momento non disponibile per questo tipo di annuncio — oggi il controllo del dominio viene eseguito solo per i pacchetti su npm, quindi questa riga non può ancora essere ottenuta qui, indipendentemente da cosa sia ospitato sul dominio.

✓Analisi prompt injection · pulita+30/30

✓Analisi offuscamento / esfiltrazione · pulita+20/20

StatoIndicizzato dalla community

PublisherNon verificato

FirmaNon firmato

Dominio—

Provenienza—

DipendenzeNon verificate

Superficie di strumenti58 strumenti · nessuno privilegiato

Analisi di sicurezza✓ Pulitovlive · oggiQuanto è efficace questa analisi?

ValutazioniNessuna

Indicizzato14 ago 2026

La verifica conferma l’identità del publisher (la proprietà del repo), non la sicurezza del codice. L’analisi di sicurezza copre i CVE noti e gli script di installazione sospetti.

Strumenti

58 strumenti · nessuno privilegiato

Osservato in tempo reale dall’endpoint del fornitore23h ago

Letto da un vero handshake MCP initialize → tools/list verso l’endpoint dichiarato. Nessuno strumento è stato invocato — tools/list è la chiamata di introspezione in sola lettura che il protocollo prevede a questo scopo. Riflette ciò che il server annunciava in quel momento; un endpoint ospitato non è vincolato ad alcuna versione e può cambiare senza preavviso.

https://engscript.com/mcp58 strumenti · 960 ms

Filtra gli strumentiSolo privilegiati

MIXTUREPrimary thermodynamic property calculator. Use this tool first for all mixture property calculations. Supports hydrocarbons and non-hydrocarbon chemicals (PR EOS flash calculation).

Primary thermodynamic property calculator. Use this tool first for all mixture property calculations. Supports hydrocarbons and non-hydrocarbon chemicals (PR EOS flash calculation).

Parametro	Tipo	Descrizione
HC*	array	Component list. Supported formulas or names: H2(hydrogen), CH4(methane), C2H2(acetylene), C2H4(ethylene), C2H6(ethane),C3H4(propadiene), C3H6(propene), C3H8(pr…
mole*	array	Mole fractions or mole amounts corresponding to HC. Automatically normalized.
P*	object	Pressure
T*	object	Temperature
Tbub_unit	string	Bubble point Tbub unit
Tdew_unit	string	Dew point Tdew unit
MW_unit	string	Molecular weight unit
H_unit	string	Enthalpy unit
S_unit	string	Entropy unit
U_unit	string	Internal energy U unit
Cp_unit	string	Heat capacity Cp unit
Cv_unit	string	Heat capacity Cv unit
rho_unit	string	Density unit
mu_unit	string	Viscosity mu unit
k_unit	string	Thermal conductivity k unit

CARBONCalculate thermodynamic properties of hydrocarbon mixture. Supports hydrocarbons and non-hydrocarbon chemicals (PR EOS flash calculation).

Calculate thermodynamic properties of hydrocarbon mixture. Supports hydrocarbons and non-hydrocarbon chemicals (PR EOS flash calculation).

Parametro	Tipo	Descrizione
HC*	array	List of component formula strings. Supported: H2, CH4, C2H2, C2H4, C2H6, C3H4, C3H6, C3H8, C4H8, C4H10, C5H12, C6H14, C7H16, C8H18, C9H20, C10H22, C6H6, C7H8,…
mole*	array	Mole fraction list corresponding to HC, e.g. [0.85, 0.10, 0.03, 0.02]
P*	object	Pressure
T*	object	Temperature
Tbub_unit	string	Bubble point temperature unit
Tdew_unit	string	Dew point temperature unit
H_unit	string	Enthalpy unit
S_unit	string	Entropy unit
Cp_unit	string	Cp unit
Cv_unit	string	Cv unit
rho_unit	string	Density unit

STEAMCalculate thermodynamic and transport properties of steam based on IAPWS

Calculate thermodynamic and transport properties of steam based on IAPWS

Parametro	Tipo	Descrizione
P*	object	Pressure
T*	object	Temperature
Psat_unit	string	Saturation pressure unit
Tsat_unit	string	Saturation temperature unit
H_unit	string	Enthalpy unit
S_unit	string	Entropy unit
rho_unit	string	Density unit
U_unit	string	Internal energy unit
mu_unit	string	Viscosity unit
k_unit	string	Thermal conductivity unit
Cp_unit	string	Cp unit
Cv_unit	string	Cv unit

PSYCHROMETRICPsychrometric properties of moist air

Psychrometric properties of moist air

Parametro	Tipo	Descrizione
BP*	object	—
DB*	object	—
WB	object	—
DP	object	—
RH	object	—
WB_unit	string	Wet bulb temperature output unit
DP_unit	string	Dew point temperature output unit
H_unit	string	Enthalpy output unit (HDA/HWA)
rho_unit	string	Density output unit (DDA/DWA)
V_unit	string	Specific volume unit (VDA/VWA)

FUELGASCalculate MW, LHV and HHV of fuel gas from composition

Calculate MW, LHV and HHV of fuel gas from composition

Parametro	Tipo	Descrizione
HC*	array	List of fuel component formula strings, e.g. ['CH4', 'C2H6', 'H2', 'N2']
mole*	array	Mole fraction list corresponding to HC, e.g. [0.90, 0.05, 0.03, 0.02]
MW_unit	string	MW output unit
LHV_unit	string	LHV output unit
HHV_unit	string	HHV output unit

FLUEGASCalculate enthalpy of flue gas from composition

Calculate enthalpy of flue gas from composition

Parametro	Tipo	Descrizione
HC*	array	List of fuel component formula strings, e.g. ['CH4', 'C2H6', 'N2']
mole*	array	Mole fraction list corresponding to HC, e.g. [0.90, 0.05, 0.05]
Tb*	object	Base temperature
Tg*	object	Flue gas temperature
MW_unit	string	MW output unit
Cp_unit	string	Cp output unit
dH_unit	string	Enthalpy output unit

EMISSIONFACTORCalculate CO2 emission conversion factor from gas composition

Calculate CO2 emission conversion factor from gas composition

Parametro	Tipo	Descrizione
HC*	array	List of fuel component formula strings, e.g. ['CH4', 'C3H8', 'N2', 'CO2']
mole*	array	Mole fraction list corresponding to HC, e.g. [0.88, 0.05, 0.04, 0.03]
ECF_unit	string	Emission factor output unit

REFRIGERANTCalculate refrigerant thermodynamic properties using CoolProp. Provide Fluid name and any 2 state variables from: T, P, rho, H, S, U. Returns all remaining properties: T, P, rho, H, S, U, Cp, Cv, viscosity, conductivity, molecular weight.

Calculate refrigerant thermodynamic properties using CoolProp. Provide Fluid name and any 2 state variables from: T, P, rho, H, S, U. Returns all remaining properties: T, P, rho, H, S, U, Cp, Cv, viscosity, conductivity, molecular weight.

Parametro	Tipo	Descrizione
Fluid*	object	Refrigerant name. Supported: R134a, R22, R32, R410A, R407C, R1234yf, R1234ze(E), Ammonia(=NH3), CarbonDioxide(=CO2)
T	object	Temperature (INPUT if known). Units: K, C, F
P	object	Pressure (INPUT if known). Units: Pa, kPa, MPa, bar, psi
H	object	Specific Enthalpy (INPUT if known). Units: J/kg, kJ/kg
S	object	Specific Entropy (INPUT if known). Units: J/kg-K, kJ/kg-K
U	object	Specific Internal Energy (INPUT if known). Units: J/kg, kJ/kg
rho	object	Density (INPUT if known). Units: kg/m3
T_unit	string	Desired Temperature output unit
P_unit	string	Desired Pressure output unit
M_unit	string	Desired Molecular Weight output unit
H_unit	string	Desired Enthalpy output unit
S_unit	string	Desired Entropy output unit
U_unit	string	Desired Internal Energy unit
C_unit	string	Desired Cp output unit
O_unit	string	Desired Cv output unit
rho_unit	string	Desired Density output unit
V_unit	string	Desired Viscosity output unit
L_unit	string	Desired Conductivity output unit

PTVCalculate gas molar volume using equation of state

Calculate gas molar volume using equation of state

Parametro	Tipo	Descrizione
P*	object	Pressure
T*	object	Temperature
V_unit	string	Output molar volume unit

MtoVConvert mass flow rate to volumetric flow rate at standard condition

Convert mass flow rate to volumetric flow rate at standard condition

Parametro	Tipo	Descrizione
M*	object	Mass flow rate
MW*	object	Molecular weight
V_unit	string	Output gas volume flow unit

VtoMConvert volumetric flow rate to mass flow rate at standard condition and normal condition Sm3/hr, Nm3/hr, SCFH

Convert volumetric flow rate to mass flow rate at standard condition and normal condition Sm3/hr, Nm3/hr, SCFH

Parametro	Tipo	Descrizione
V*	object	Volumetric flow rate
MW*	object	Molecular weight
M_unit	string	Output mass flow unit

PmeanCalculate mean pressure between inlet and outlet

Calculate mean pressure between inlet and outlet

Parametro	Tipo	Descrizione
Fluid*	object	Fluid type (gas or liquid)
P1*	object	Inlet pressure
P2*	object	Outlet pressure
Pmean_unit	string	Output mean pressure unit

PIPEFFCalculate Darcy friction factor based on Reynolds number and pipe roughness

Calculate Darcy friction factor based on Reynolds number and pipe roughness

Parametro	Tipo	Descrizione
Piping*	object	Pipe material
D*	object	Pipe inside diameter
Re*	object	Reynolds number

STEAMPHCalculate mass flow from pin-hole on the steam piping

Calculate mass flow from pin-hole on the steam piping

Parametro	Tipo	Descrizione
P*	object	Pressure
T*	object	Temperature
h*	object	pin-hole D
Cd	object	Discharge coefficient (default: 0.80)
M_unit	string	Output mass flow unit

STEAMLEAKCalculate steam leak mass flow and flow condition (CHOKED / SUBCRITICAL) based on upstream and downstream conditions

Calculate steam leak mass flow and flow condition (CHOKED / SUBCRITICAL) based on upstream and downstream conditions

Parametro	Tipo	Descrizione
P1*	object	Upstream Pressure
P2*	object	Downstream Pressure
T1*	object	Upstream Temperature
T2*	object	Downstream Temperature
h*	object	Pin-hole Diameter
Cd	object	Discharge coefficient (default: 0.80)
M_unit	string	Output mass flow unit

PIPEINSULCalculate optimal pipe insulation thickness to limit outer surface temperature (burn protection) and minimise heat loss. Uses cylindrical heat conduction + external convection model, solved via scipy.optimize.brentq. Returns exact minimum thickness and nearest commercial 5 mm step.

Calculate optimal pipe insulation thickness to limit outer surface temperature (burn protection) and minimise heat loss. Uses cylindrical heat conduction + external convection model, solved via scipy.optimize.brentq. Returns exact minimum thickness and nearest commercial 5 mm step.

Parametro	Tipo	Descrizione
NPS*	object	Nominal Pipe Size in inches (ASME B36.10).
Tf*	object	Fluid / pipe outer surface temperature
Ta*	object	Ambient (outdoor) temperature
Tmax*	object	Maximum allowable insulation outer surface temperature (burn-prevention limit = 50 °C per EN ISO 13732-1)
kins*	object	Insulation thermal conductivity
ha*	object	External (air-side) convection coefficient
Dpipe_unit	string	Desired Pipe OD output unit
tins_unit	string	Desired Insulation thickness output unit
r2_unit	string	Desired Pipe outer radius output unit
r3_unit	string	Desired Insulation outer radius output unit
Tsurf_unit	string	Desired Surface temperature output unit
Qloss_unit	string	Desired Heat loss output unit

PIPESTEAMCalculate steam pipe sizing: pipe diameter, velocity, pressure drop

Calculate steam pipe sizing: pipe diameter, velocity, pressure drop

Parametro	Tipo	Descrizione
P*	object	Steam pressure
T*	object	Steam temperature
M*	object	Steam mass flow rate
L*	object	Pipe length
D_unit	string	Output pipe diameter unit
u_unit	string	Output velocity unit
dP_unit	string	Output pressure drop unit
rho_unit	string	Output density unit

PIPEWATERCalculate water pipe sizing: pipe diameter, velocity, pressure drop

Calculate water pipe sizing: pipe diameter, velocity, pressure drop

Parametro	Tipo	Descrizione
P*	object	Water pressure
T*	object	Water temperature
M*	object	Water mass flow rate
L*	object	Pipe length
D_unit	string	Output pipe diameter unit
u_unit	string	Output velocity unit
dP_unit	string	Output pressure drop unit
rho_unit	string	Output density unit

PIPEAIRCalculate compressed air pipe sizing: pipe diameter, velocity, pressure drop

Calculate compressed air pipe sizing: pipe diameter, velocity, pressure drop

Parametro	Tipo	Descrizione
P*	object	Compressed air pressure
T*	object	Compressed air temperature
M*	object	Compressed air mass flow rate
L*	object	Pipe length
D_unit	string	Output pipe diameter unit
u_unit	string	Output velocity unit
dP_unit	string	Output pressure drop unit
rho_unit	string	Output density unit

PIPENITROGENCalculate nitrogen pipe sizing: pipe diameter, velocity, pressure drop

Calculate nitrogen pipe sizing: pipe diameter, velocity, pressure drop

Parametro	Tipo	Descrizione
P*	object	Nitrogen pressure
T*	object	Nitrogen temperature
M*	object	Nitrogen mass flow rate
L*	object	Pipe length
D_unit	string	Output pipe diameter unit
u_unit	string	Output velocity unit
dP_unit	string	Output pressure drop unit
rho_unit	string	Output density unit

PIPEFLOWGASCalculate isothermal gas pipe flow: density, volumetric flow rate, mass flow rate from pressure drop

Calculate isothermal gas pipe flow: density, volumetric flow rate, mass flow rate from pressure drop

Parametro	Tipo	Descrizione
P1*	object	Upstream (inlet) pressure
P2*	object	Downstream (outlet) pressure
T*	object	Gas temperature
L*	object	Pipe length
D*	object	Pipe inside diameter
MW*	object	Gas molecular weight
rho_unit	string	Output density unit
Q_unit	string	Output volumetric flow unit (normal conditions)
M_unit	string	Output mass flow unit

PIPEFLOWLIQCalculate liquid pipe flow: volumetric flow rate and mass flow rate from pressure drop

Calculate liquid pipe flow: volumetric flow rate and mass flow rate from pressure drop

Parametro	Tipo	Descrizione
P1*	object	Upstream (inlet) pressure
P2*	object	Downstream (outlet) pressure
L*	object	Pipe length
D*	object	Pipe inside diameter
rho*	object	Liquid density
Q_unit	string	Output volumetric flow unit
M_unit	string	Output mass flow unit

CVGASCalculate gas control valve Cv and Kv from flow conditions

Calculate gas control valve Cv and Kv from flow conditions

Parametro	Tipo	Descrizione
Q*	object	Gas volumetric flow rate at standard conditions
P1*	object	Upstream pressure
P2*	object	Downstream pressure
T1*	object	Inlet gas temperature
MW*	object	Gas molecular weight
k*	object	Specific heat ratio (Cp/Cv)
Cv_unit	string	Output Cv unit
Kv_unit	string	Output Kv unit

CVLIQCalculate liquid control valve Cv and Kv from flow conditions

Calculate liquid control valve Cv and Kv from flow conditions

Parametro	Tipo	Descrizione
Q*	object	Liquid volumetric flow rate
P1*	object	Upstream pressure
P2*	object	Downstream pressure
rho*	object	Liquid density
Pv	object	Liquid vapor pressure (optional, default 0 kPa)
Pc	object	Liquid critical pressure (optional, default 22120 kPa)
FL	object	Liquid pressure recovery factor (optional, default 0.9)
Cv_unit	string	Output Cv unit
Kv_unit	string	Output Kv unit

CVSTEAMCalculate steam control valve Cv and Kv from flow conditions

Calculate steam control valve Cv and Kv from flow conditions

Parametro	Tipo	Descrizione
M*	object	Steam mass flow rate
P1*	object	Upstream pressure
P2*	object	Downstream pressure
rho*	object	Steam density
Cv_unit	string	Output Cv unit
Kv_unit	string	Output Kv unit

ORIFICEGASGas orifice sizing / differential pressure / flow rate calculation based on ISO 5167 orifice. Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.

Gas orifice sizing / differential pressure / flow rate calculation based on ISO 5167 orifice. Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.

Parametro	Tipo	Descrizione
M*	object	Gas mass flow rate. Set value='?' to calculate.
dP*	object	Differential pressure across orifice. Set value='?' to calculate.
D2*	object	Orifice bore diameter. Set value='?' to calculate.
P1*	object	Upstream (operating) pressure
D1*	object	Pipe inside diameter
rho*	object	Fluid density
mu*	object	Dynamic viscosity
k	object	Heat capacity ratio (Cp/Cv), default 1.4

ORIFICELIQLiquid orifice sizing / differential pressure / flow rate calculation based on ISO 5167 orifice. Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.

Liquid orifice sizing / differential pressure / flow rate calculation based on ISO 5167 orifice. Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.

Parametro	Tipo	Descrizione
M*	object	Liquid mass flow rate. Set value='?' to calculate.
dP*	object	Differential pressure across orifice. Set value='?' to calculate.
D2*	object	Orifice bore diameter. Set value='?' to calculate.
P1*	object	Upstream (operating) pressure
D1*	object	Pipe inside diameter
rho*	object	Fluid density
mu*	object	Dynamic viscosity

VENTURIGASGas Venturi tube sizing / differential pressure / flow rate calculation based on ISO 5167 Venturi meter (as cast convergent venturi tube). Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.

Gas Venturi tube sizing / differential pressure / flow rate calculation based on ISO 5167 Venturi meter (as cast convergent venturi tube). Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.

Parametro	Tipo	Descrizione
M*	object	Gas mass flow rate. Set value='?' to calculate.
dP*	object	Differential pressure across Venturi meter. Set value='?' to calculate.
D2*	object	Venturi throat diameter. Set value='?' to calculate.
P1*	object	Upstream (operating) pressure
D1*	object	Pipe inside diameter
rho*	object	Fluid density
mu*	object	Dynamic viscosity
k	object	Heat capacity ratio (Cp/Cv), default 1.4

VENTURILIQLiquid Venturi tube sizing / differential pressure / flow rate calculation based on ISO 5167 Venturi meter (as cast convergent venturi tube). Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.

Liquid Venturi tube sizing / differential pressure / flow rate calculation based on ISO 5167 Venturi meter (as cast convergent venturi tube). Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.

Parametro	Tipo	Descrizione
M*	object	Liquid mass flow rate. Set value='?' to calculate.
dP*	object	Differential pressure across Venturi meter. Set value='?' to calculate.
D2*	object	Venturi throat diameter. Set value='?' to calculate.
P1*	object	Upstream (operating) pressure
D1*	object	Pipe inside diameter
rho*	object	Fluid density
mu*	object	Dynamic viscosity

PSVGASCalculate required PSV (pressure safety valve) relief area for gas/vapor service per API 520

Calculate required PSV (pressure safety valve) relief area for gas/vapor service per API 520

Parametro	Tipo	Descrizione
M*	object	Relieving mass flow rate
P1*	object	Upstream relieving pressure (set pressure + overpressure + atm)
P2*	object	Downstream (back) pressure
T1*	object	Relieving temperature
MW*	object	Gas/vapor molecular weight
k	object	Heat capacity ratio (Cp/Cv), default 1.4
Kb	object	Capacity correction factor for back pressure, default 1.0
Kc	object	Combination correction factor (rupture disk), default 1.0
Kd	object	Effective coefficient of discharge, default 0.975
A_unit	string	Output relief area unit

PSVSTEAMCalculate required PSV (pressure safety valve) relief area for steam service per API 520

Calculate required PSV (pressure safety valve) relief area for steam service per API 520

Parametro	Tipo	Descrizione
M*	object	Relieving mass flow rate
P1*	object	Upstream relieving pressure (set pressure + overpressure + atm)
T1*	object	Relieving temperature
Kb	object	Capacity correction factor for back pressure, default 1.0
Kc	object	Combination correction factor (rupture disk), default 1.0
Kd	object	Effective coefficient of discharge, default 0.975
A_unit	string	Output relief area unit

PSVLIQCalculate required PSV (pressure safety valve) relief area for liquid service per API 520

Calculate required PSV (pressure safety valve) relief area for liquid service per API 520

Parametro	Tipo	Descrizione
M*	object	Relieving mass flow rate
P1*	object	Upstream relieving pressure (set pressure + overpressure + atm)
P2*	object	Downstream (back) pressure
Pover	object	Overpressure fraction (e.g. 0.1 = 10%), default 0.1
rho*	object	Liquid density
Kc	object	Combination correction factor (rupture disk), default 1.0
Kd	object	Effective coefficient of discharge, default 0.65
Kv	object	Viscosity correction factor, default 1.0
Kw	object	Back pressure correction factor (balanced bellows), default 1.0
A_unit	string	Output relief area unit

PUMPBHPCalculate pump brake horsepower

Calculate pump brake horsepower

Parametro	Tipo	Descrizione
rho*	object	Fluid density
Q*	object	Volumetric flow rate
P1*	object	Inlet pressure
P2*	object	Outlet pressure
Eff*	object	Pump efficiency
BHP_unit	string	Output power unit

COMPPOLYEFFCalculate polytropic efficiency of compressor

Calculate polytropic efficiency of compressor

Parametro	Tipo	Descrizione
Pi*	object	Inlet pressure
Po*	object	Outlet pressure
Ti*	object	Inlet temperature
To*	object	Outlet temperature
k*	object	Heat capacity ratio

TBNEFFCalculate steam turbine isentropic efficiency

Calculate steam turbine isentropic efficiency

Parametro	Tipo	Descrizione
Pi*	object	Inlet pressure
Ti*	object	Inlet temperature
Po*	object	Outlet pressure
To*	object	Actual outlet temperature
Eff_unit	string	Output efficiency unit

STGEFFCalculate multistage steam turbine isentropic efficiency

Calculate multistage steam turbine isentropic efficiency

Parametro	Tipo	Descrizione
M1*	object	Main steam flow
M2	object	Extraction steam flow #1
M3	object	Extraction steam flow #2
M4	object	Extraction steam flow #3
M5	object	Extraction steam flow #4
P1*	object	Stage pressure #1
T1*	object	Stage temperature #1
P2*	object	Stage pressure #2
T2*	object	Stage temperature #2
P3	object	Stage pressure #3
T3	object	Stage temperature #3
P4	object	Stage pressure #4
T4	object	Stage temperature #4
P5	object	Stage pressure #5
T5	object	Stage temperature #5
E*	object	Actual generator output
Eff_unit	string	—

HTRINOUTEFFCalculate fired heater heat duty and efficiency from inlet/outlet conditions and composition

Calculate fired heater heat duty and efficiency from inlet/outlet conditions and composition

Parametro	Tipo	Descrizione
HC*	object	Fuel gas hydrocarbon component list (e.g. ['CH4','C2H6'])
mole*	object	Fuel gas mole fraction list matching HC order (e.g. [0.9, 0.1])
Mfuel*	object	Fuel mass flow rate
Tfuel*	object	Fuel temperature
Tair*	object	Combustion air temperature
exO2*	object	Excess oxygen in flue gas
Trad*	object	Radiant section outlet temperature
Tstk*	object	Stack gas temperature
Mair_unit	string	Output air mass flow rate unit
MWfuel_unit	string	Output fuel molecular weight unit
LHVfuel_unit	string	Output fuel LHV unit
Qduty_unit	string	Output total heat duty unit
Qrad_unit	string	Output radiant section duty unit
Qconv_unit	string	Output convection section duty unit
Qloss_unit	string	Output heat loss unit

HTRLOSSEFFCalculate fired heater loss efficiency from ambient temperature, stack gas temperature and excess oxygen

Calculate fired heater loss efficiency from ambient temperature, stack gas temperature and excess oxygen

Parametro	Tipo	Descrizione
Type*	object	Fuel type
Tg*	object	Stack gas temperature
Ta*	object	Ambient temperature
exO2*	object	Excess oxygen

HEXRFHeat exchanger fouling resistance back-calculation from shell/tube-side operating conditions.

Heat exchanger fouling resistance back-calculation from shell/tube-side operating conditions.

Parametro	Tipo	Descrizione
Unknown*	string	Which unknown is being solved for.
D_shll*	object	Shell inside diameter
D_tube*	object	Tube outside diameter
D_wall*	object	Tube wall thickness
P_tube*	object	Tube pitch
S_baffle*	object	Baffle spacing
N_tube*	object	Number of tubes
L_tube*	object	Tube length
N_shllseri*	object	Number of shells in series
N_shllpara*	object	Number of shells in parallel
N_shllpass*	object	Number of shell-side passes
N_tubepass*	object	Number of tube-side passes
A_hex*	object	Total heat transfer area
R_shll*	object	Shell-side fouling resistance
R_tube*	object	Tube-side fouling resistance
F*	object	Correction factor (dimensionless)
k_hex*	object	Tube wall thermal conductivity
T_shll*	object	Shell-side temperature range [T1, T2] used for property evaluation
rho_shll*	object	Shell-side fluid density list
Cp_shll*	object	Shell-side fluid heat capacity list
mu_shll*	object	Shell-side fluid viscosity list
k_shll*	object	Shell-side fluid thermal conductivity list
T_tube*	object	Tube-side temperature range [T1, T2] used for property evaluation
rho_tube*	object	Tube-side fluid density list

LMTDCalculate LMTD of heat exchanger

Calculate LMTD of heat exchanger

Parametro	Tipo	Descrizione
Thi*	object	Hot inlet temperature
Tho*	object	Hot outlet temperature
Tci*	object	Cold inlet temperature
Tco*	object	Cold outlet temperature
LMTD_unit	string	Output LMTD unit

STEAMFLASHCalculate flash steam flow from pressure reduction

Calculate flash steam flow from pressure reduction

Parametro	Tipo	Descrizione
Mc*	object	Condensate flow rate
Pc*	object	Condensate pressure
Ps*	object	Steam header pressure
Ms_unit	string	Output flash steam flow unit

DESUPERHEATERCalculate boiler feed water flow and total flow from pressure and temperature reduction through desuperheater. Also returns the inlet/outlet/BFW specific enthalpies (h_in, h_out, h_bfw) used in the mass balance, always in Btu/lb.

Calculate boiler feed water flow and total flow from pressure and temperature reduction through desuperheater. Also returns the inlet/outlet/BFW specific enthalpies (h_in, h_out, h_bfw) used in the mass balance, always in Btu/lb.

Parametro	Tipo	Descrizione
Min*	object	Inlet steam flow rate
Pin*	object	Inlet steam pressure
Tin*	object	Inlet steam temperature
Pout*	object	Outlet steam pressure
Tout*	object	Outlet steam temperature
Pbfw*	object	BFW (boiler feed water) pressure
Tbfw*	object	BFW (boiler feed water) temperature
Mbfw_unit	string	Required BFW (boiler feed water) flow unit
Mout_unit	string	Total output steam flow unit

HPADEPRESSCalculate depressurization gas volume and hold time for high pressure air storage vessel

Calculate depressurization gas volume and hold time for high pressure air storage vessel

Parametro	Tipo	Descrizione
V1*	object	Vessel volume
P1*	object	Initial pressure
P2*	object	Final pressure
Q2*	object	Gas consumption rate
V2_unit	string	Available gas volume unit
H_unit	string	Required hold time unit

GN2DEPRESSCalculate depressurization gas volume and hold time for gaseous nitrogen storage vessel

Calculate depressurization gas volume and hold time for gaseous nitrogen storage vessel

Parametro	Tipo	Descrizione
V1*	object	Vessel volume
P1*	object	Initial pressure
P2*	object	Final pressure
Q2*	object	Nitrogen consumption rate
V2_unit	string	Available gas volume unit
H_unit	string	Required hold time unit

LN2DEPRESSCalculate depressurization gas volumn abd hold time and saturation temperature for liquid nitrogen storage vessel

Calculate depressurization gas volumn abd hold time and saturation temperature for liquid nitrogen storage vessel

Parametro	Tipo	Descrizione
V1*	object	Tank volume
P1*	object	Initial pressure
P2*	object	Final pressure
Q2*	object	Nitrogen consumption rate
T1_unit	string	Required temperature unit
V2_unit	string	Available gas volume unit
H_unit	string	Required hold time unit

STMDEPRESSCalculate depressurization steam volumn and hold time for steam accumulator

Calculate depressurization steam volumn and hold time for steam accumulator

Parametro	Tipo	Descrizione
V1*	object	Accumulator volume
P1*	object	Initial pressure
P2*	object	Final pressure
M2*	object	Steam consumption rate
V2_unit	string	Available steam amount unit
H_unit	string	Required hold time unit

CTWREVAPORCooling tower evaporation rate: mass removal rate (MR) and heat removal rate (QR)

Cooling tower evaporation rate: mass removal rate (MR) and heat removal rate (QR)

Parametro	Tipo	Descrizione
INPUT*	object	—
OUTPUT	object	—

CTWRLGCooling tower L/G ratio calculation

Cooling tower L/G ratio calculation

Parametro	Tipo	Descrizione
INPUT*	object	—
OUTPUT	object	—

CTWRNTUCooling tower NTU and characteristic C value calculation

Cooling tower NTU and characteristic C value calculation

Parametro	Tipo	Descrizione
INPUT*	object	—
OUTPUT	object	—

CTWRCAPACooling tower capacity evaluation

Cooling tower capacity evaluation

Parametro	Tipo	Descrizione
INPUT*	object	—
OUTPUT	object	—

CTWRCAPADSNTSTCooling tower capacity evaluation: design vs test

Cooling tower capacity evaluation: design vs test

Parametro	Tipo	Descrizione
INPUT*	object	—
OUTPUT	object	—

DVRData Validation and Reconciliation

Data Validation and Reconciliation

Parametro	Tipo	Descrizione
MEASURED*	object	Measured values. Format: {TAG: {value: number, unit: string}}. Example: {A: {value: 100, unit: ''}}
ACCURACY*	object	Measurement accuracy in %. Format: {TAG: {value: number, unit: '%'}}. Example: {A: {value: 5, unit: '%'}}
EQUATION*	object	Constraint equations. Format: {EQ1: 'A=B+C', EQ2: 'C=D+E'}. Each value is an equation string with '=' separator.

advDVRAdvanced Data Validation and Reconciliation including gross error detection and elimation

Advanced Data Validation and Reconciliation including gross error detection and elimation

Parametro	Tipo	Descrizione
MEASURED*	object	Measured values. Format: {TAG: {value: number, unit: string}}. Example: {A: {value: 100, unit: ''}}
ACCURACY*	object	Measurement accuracy in %. Format: {TAG: {value: number, unit: '%'}}. Example: {A: {value: 5, unit: '%'}}
EQUATION*	object	Constraint equations. Format: {EQ1: 'A=B+C', EQ2: 'C=D+E'}. Each value is an equation string with '=' separator.

BALANCEGeneral mass/energy balance solver using GEKKO

General mass/energy balance solver using GEKKO

Parametro	Tipo	Descrizione
VARIABLE*	object	Decision variables. Each entry: [lb, init, ub] for free variable, or [fixed, fixed, fixed] for constant.
EQUATION*	object	Equality/inequality constraints. Keys prefixed eq/ge/le/gt/lt. Each entry: {'left': expr, 'right': expr}.
MINIMIZE	object	Objective to minimize. Format: {'left': 'mintarget', 'right': 'expr'}.
MAXIMIZE	object	Objective to maximize. Format: {'left': 'maxtarget', 'right': 'expr'}.

FORMULAGeneric formula calculator with unit conversion and IF-THEN-ELSE

Generic formula calculator with unit conversion and IF-THEN-ELSE

Parametro	Tipo	Descrizione
INPUT*	object	—
UNIT	object	—
FORMULA*	object	—
OUTPUT*	object	—

SOLVESolve nonlinear equations with unknown variables using fsolve

Solve nonlinear equations with unknown variables using fsolve

Parametro	Tipo	Descrizione
INPUT*	object	—
FORMULA*	object	—
OUTPUT*	object	—

ECONOMICEconomic analysis: NPV, IRR, Simple Payback, Profitability Index, EAC

Economic analysis: NPV, IRR, Simple Payback, Profitability Index, EAC

Parametro	Tipo	Descrizione
R	object	Discount rate (fraction, e.g. 0.1 for 10%). Default 0.1.
CF*	object	Cash flow list, period 0 (initial investment, negative) through final period, e.g. [-100000, 30000, 30000, 30000]

advECONOMICAdvanced Economic analysis with inflation, depreciation, and tax: NPV, IRR, Simple Payback, Profitability Index, NCF

Advanced Economic analysis with inflation, depreciation, and tax: NPV, IRR, Simple Payback, Profitability Index, NCF

Parametro	Tipo	Descrizione
INPUT*	object	—

58 strumenti su 58 hanno pubblicato una descrizione.

I nomi e le descrizioni degli strumenti sono scritti dal publisher e mostrati alla lettera come testo inerte. Sono le stringhe che un client MCP passa a un modello, quindi Forge vi cerca schemi di prompt injection — ogni rilievo compare insieme all’analisi di sicurezza qui sopra. «Privilegiato» è una corrispondenza di parola chiave sul nome dello strumento, non una verifica di ciò che fa: un nome innocuo può comunque fare qualsiasi cosa.

Descrizione

Engineering calculation MCP server for oil and gas engineering applications.

Parole chiave

mcp

Alternative

Confronto delle superfici di strumenti…

com.engscript/mcp

Strumenti

Strumenti esposti

Nessuna copertura delle dipendenze